High-pressure system combiloop CL2G

FOR CONTINUOUS USE UP TO 100 BAR

Mobile, compact high-pressure unit with 3-chamber tank system for continuous use of high pressure on machine tools. Suitable for all materials, especially fine-chipping materials such as brass and aluminium. Protected functional principle of dirt pre-separation in the 3-chamber tank system.

Inside the well-proportioned system, the protected functional principle of dirt pre-separation in the 3-chamber tank system in combination with easily accessible, washable wire mesh elements of the new filter concept ensures fine filtration and a constant pump enables pressures of up to 100 bar. Protected by the patented pre-separation, the new filter cartridges with a filter surface area of between 18,000 and 20,000 cm², depending on the filter fineness, achieve outstanding service lives.

Already in multiple use worldwide on machine tools from the following manufacturers:
Benzinger, Biglia, Brother, Bumotec (Starrag), Chiron, Citizen, DMGMORI, Fanuc, Hermle, Index, Kitamura, Manurhin, Mazak, Nakamura, Okuma, Pfiffner, Schütte, Star, Tornos, Traub, Tsugami, Willemin-Macodel, and many more.

Technical data

CharacteristicVersion
Equipment
  • approx. 1,050 x 590 x 1,120 mm (L x W x H), weight approx. 270 kg
  • < 100 bar, high-pressure pump as constant pump (robust gear pump), 3-chamber tank system with pre-separation, 200-litre clean tank, electric control unit
  • Power supply 3∼/ PE 400 V / 50 Hz
Flow rate
  • 9 / 12 / 16 / 20 / 24 l/min
Pressure
  • Depending on variant, progressive up to 70 bar or 100 bar
Filter
  • 150-μm pre-filter integrated in 3-chamber tank system
  • Replaceable filter, washable wire mesh
  • Double changeover filter, washable wire mesh
  • Electrical clogging indicator
Filter fineness
  • 25 μm / 40 μm / 60 μm (option: 10 μm)
Operation
  • Cutting oil
  • Water emulsion (min. 8 % oil content)
Service connections
  • Up to 10 controllable servive connections
Electrical interface
  • Two-channel monitoring in accordance with machine safety guidelines for all common machine tools with their own control intelligence
Options
  • Frequency inverter
  • Mechanically pressure-controlled high-pressure outlets
  • Pressure control via the machine programme
  • High-pressure pump also available as a screw pump on request
  • Post-filtration down to 6 µm of individual tools
Degree of machine contamination
more  
Our recommendation for:



 
  • Low degree of contamination (e.g. free-cutting steel, coarse chips, few fine chips)
  • Medium degree of soiling (e.g. free-cutting steel, stainless steel, mixed fine/coarse chip ratio)

Advantages and highlights

Clever modular system with the highest standards

  • Progressive up to 100 bar (robust gear pump with cast housing and noise damping as well as good pump efficiency class)
  • Early chip breaking, spindle flushing, enables deep hole drilling
  • Industry 4.0 safety features to prevent machine downtime
  • Flow monitor as standard
  • Handles all common cooling lubricants
  • Up to 10 times longer tool life

Ingenious, well thought-out design

  • High temperature stability thanks to 200-litre clean tank
  • Quick filter change from above, without contaminating the clean area
  • Electrical clogging indicator
  • Lightweight, removable inspection panels: extremely compact installation
  • Easy to service: motor-pump unit can be pulled out
  • Accessibility: high operating and service ergonomics
  • Safety, professionalism, durability

Ingenious filter concept + 200-litre clean tank

  • Long service life, significant reduction in operating costs
  • Double changeover filter: no downtime when changing filters
  • 3-chamber pre-separation system (150 μm)
  • Increased service life thanks to dynamic fine filter concept (up to 25 μm)
  • Wire mesh: no polymer, reusable, cost-efficient, recyclable
  • Different filter concepts for customised flexibility

FUNCTION

Baugruppenzeichnung der Hochdruckanlage combiloop CL2 G von Müller Hydraulik
Baugruppenzeichnung der Hochdruckanlage combiloop CL2 G von Müller Hydraulik

Caption:

    1. Modern housing with 200 litre 3-chamber tank system
    2. Transfer pump
    3. Pre-separation chamber (150 μm) with access opening
    4. Motor and high-pressure pump (gear wheel)
    5. Fine filter as double switch filter, 2x single filter (replace/clean)
    6. Changeover tap (filter I or filter II)
    7. Control valve with display for infinitely variable adjustment of the operating pressure
    8. Manifold block with switchable outlets
    9. Status display (clear, modern function visualisation via LED colour coding system)
    10. Electrical control unit
    Function and description of the combiloop CL2 G high-pressure system
    The combiloop CL2 G high-pressure system draws the contaminated cooling lubricant from the machine tank of the machine tool via an integrated transfer pump and separates it using the patented pre-separation system of the 3-chamber tank. It then fills its own clean tank. The high-pressure pump then draws the cooling lubricant, pre-cleaned to 150 µm, from the clean tank through a fine filter and makes the cleaned cooling lubricant available to the tools of the machine tool via the switchable high-pressure outlets. Up to 10 switchable high-pressure outlets can be selected via M functions in the machine programme. The operating pressure can be set manually on the high-pressure system or, depending on the expansion stage, directly from the machine control system. An electrical signal triggers an alarm in the event of filter contamination. To clean the filter, the machine must either be stopped and the filter element replaced or cleaned, or, if a double-switching filter is used, it is possible to switch from filter 1 to filter 2 without stopping the machine. A specially developed pre-warning system emits a yellow warning signal when around 80% of the filter capacity is exhausted in order to organise the work process without necessarily triggering a machine standstill. Regardless of whether it is a single or double filter, the high-pressure system can also be equipped with a frequency converter to operate the system gently and energy-efficiently. A flow monitor is installed for safety, which checks whether medium is flowing and can cause the machine to stop immediately if tools become blocked. Effective spindle flushing via the high-pressure system is also possible using a pressurised high-pressure outlet.

    DOWNLOADS


    Icon Nach oben